[INCH-POUND] A-A-2602A
November 19, 1990
SUPERSEDING
A-A-2602
February 24, 1989
COMMERCIAL ITEM DESCRIPTION
SHREDDING MACHINE, PAPER, OFFICE (CROSS-CUT)
The General Services Administration has authorized the use of this commercial item description in preference to Interim Federal Specification FF-S-00ll69.
This description covers cross-cut paper shredders which are intended for use on letter size paper and computer printout forms containing non-classified data. They shall be of the following classes:
Class I - Throat width - 8-3/4 inches, min.
Capacity - 5 sheets, min.
Speed - 20 ft/minute, min.
Class II - Throat width - 12 inches, min.
Capacity - 10 sheets, min.
Speed - 34 feet/minute, min.
Salient characteristics.
Models. Machine shall be furnished either as a tabletop model with mounting stand/cabinet or as a console type with casters.
Shredding pattern. Shredded material shall have a width of not more than 1/8 inch and a length of not more than 1 inch.
Capacity. Capacity is defined as the number of sheets of 20-lb. bond paper, 8-
1/2 by 11 inches in size, than can be fed simultaneously into the machine
without jamming.
Controls. Shredders shall be provided with either automatic shut-off and reverse controls or manual shut-off and forward and reverse flow controls.
Power requirements. Shredders shall be capable of operating on 115 volt, 60 Hz
AC electrical current.
Identification. Each shredder shall have the manufacturer's serial number permanently and legibly stamped or affixed on a major component in a readily accessible location. In addition, each shredder shall be permanently marked in a conspicuous location with the manufacturer's name or trademark.
Instruction manual. An instruction manual shall be furnished with each machine. The manual shall contain complete instructions necessary for operation, maintenance and minor repair of the machine.
Workmanship. The machine, including all parts and accessories, shall be fabricated and finished in accordance with good workmanship standards. The
DISTRIBUTION STATEMENT A: Approved for
public release; distribution is unlimited. FSC 7490
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business